Spray Paint
Our product range includes a wide range of 500ml crc 5-56 pro multi-purpose lubricant spray, crc qd contact cleaner and crc 3-36 multi-purpose lubricant and corrosion inhibitor.
Request CallBack
Get Best Quote
500ml CRC 5-56 Pro Multi-purpose Lubricant Spray
Approx. Price: Rs 350 / PieceGet Latest Price
Product Brochure Product Details:
| Packaging Size | 500 ml |
| Usage/Application | Industrial |
| Form | Liquid |
| Color | Red |
| Surface Finish | Polished |
| Eco Friendly | Yes |
: Features • General Corrosion protection. • Temporary conservation of metal parts during storage. • Protects metals and alloys. • Displaces and seals out water and moisture. • Loosens metal parts seized by dirt, corrosion or dried-up grease. • Penetrates quickly. • Safe on all metal surfaces, does not stain. • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. • Convenient 360° (including inverted position) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95% (aerosol).
3: Applications • Seized and corroded parts. • To remove moisture from ignition systems. • Professional multipurpose automotive product.
4: Directions • Apply a thin even film. • Use extension tube for more precise application. • Allow a few minutes for good penetration • Repeat if necessary. • To remove residues or excess product, use CRC Power Clean Pro. • Do not use on energized equipment. • A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.
3: Applications • Seized and corroded parts. • To remove moisture from ignition systems. • Professional multipurpose automotive product.
4: Directions • Apply a thin even film. • Use extension tube for more precise application. • Allow a few minutes for good penetration • Repeat if necessary. • To remove residues or excess product, use CRC Power Clean Pro. • Do not use on energized equipment. • A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.
Yes! I am Interested
Request CallBack
Get Best Quote
CRC QD Contact Cleaner
Approx. Price: Rs 400 / PieceGet Latest Price
Product Brochure Product Details:
| Packaging Size | 250ml |
| Packaging Type | Can |
| Usage/Application | Industrial |
| Color | Black |
1.General description Quick dry electronic cleaning solvent. CRC QD-Contact Cleaner is a stable, inert, high-purity solvent cleaner, formulated for applications where lower flash point solvents may be used, and where sensitive plastics are involved. Based on very fast drying, hydrocarbon solvents without CFC’s, HCFC’s, chlorinated-, fluorinated-, alcohol- or glycol ether components. CRC QD-Contact Cleaner provides a suitable precision cleaning action for sensitive electronics and electrical equipment without risk of costly damage.
2.Features • Quick drying. • Effectively removes light contaminants, dust, dirt, finger prints, traces of light oil and moisture. • No ozone-depleting action (ODP = 0,00). • Reduces contact resistance, arcing and wear. • Extends the life of sensitive equipment. • Non-conductive and non-corrosive. • Leaves no residue. • Safe on commonly used plastics, rubbers and coatings. • Convenient 360° (upside-down) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95 %
3.Applications Ideal for applications where lower flash point solvents may be used and where sensitive plastics are present : • Contactors • Switches • Sensors • Relays • Motor controls • PCB • Terminals • Tape heads • PC’s • Telephones A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.
4.Directions • Spray liberally on surface to be cleaned and allow to run off. Use extension tube for precision application. • Use an abrasive on surfaces with carbon deposits or oxidation; remove residue with intermittent spray. Re-lubricate with CRC 2-26 if necessary. • Highly flammable formulation. Do not spray on energized electrical equipment or circuits; de-activate before product application and extinguish all flames, pilot lights and heaters • During use, flammable vapours may accumulate, especially in closed equipment. Use with adequate ventilation and maintain ventilation until vapours are gone. Allow to dry thoroughly before reactivating systems. • Observe care in applications on highly sensitive plastics, adhesive-mounted or stressed parts
2.Features • Quick drying. • Effectively removes light contaminants, dust, dirt, finger prints, traces of light oil and moisture. • No ozone-depleting action (ODP = 0,00). • Reduces contact resistance, arcing and wear. • Extends the life of sensitive equipment. • Non-conductive and non-corrosive. • Leaves no residue. • Safe on commonly used plastics, rubbers and coatings. • Convenient 360° (upside-down) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95 %
3.Applications Ideal for applications where lower flash point solvents may be used and where sensitive plastics are present : • Contactors • Switches • Sensors • Relays • Motor controls • PCB • Terminals • Tape heads • PC’s • Telephones A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.
4.Directions • Spray liberally on surface to be cleaned and allow to run off. Use extension tube for precision application. • Use an abrasive on surfaces with carbon deposits or oxidation; remove residue with intermittent spray. Re-lubricate with CRC 2-26 if necessary. • Highly flammable formulation. Do not spray on energized electrical equipment or circuits; de-activate before product application and extinguish all flames, pilot lights and heaters • During use, flammable vapours may accumulate, especially in closed equipment. Use with adequate ventilation and maintain ventilation until vapours are gone. Allow to dry thoroughly before reactivating systems. • Observe care in applications on highly sensitive plastics, adhesive-mounted or stressed parts
Yes! I am Interested
Request CallBack
Get Best Quote
CRC 3-36 Multi-Purpose Lubricant and Corrosion Inhibitor
Approx. Price: Rs 600 / PieceGet Latest Price
Product Brochure Product Details:
| Packaging Size | Bottle of 500ml |
| Usage/Application | Automotive |
| Vehicle Type | Heavy Vehicle |
| Color | Light Fawn |
| Features | Anti Corrosion |
| Country of Origin | Made in India |
2. Features Multi purpose fluid. Displaces and seals out water and moisture. Loosens metal parts seized by dirt, corrosion or dried-up grease. Penetrates quickly. Protects metals and alloys. Lubricates without leaving a sticky residue and prevents fingerprinting on shiny metals. Safe on all metal surfaces, does not stain. Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. Convenient 360° (including inverted position) spray valve for aerosols. High purity CO2 propellant, giving an active product content of 95%.
3. Applications Coin mechanisms. Fine mechanics. Cleaning mechanical parts. Pneumatic tools. Handling equipment. Precision instruments. Agricultural equipment. Surface treatment. Seized and corroded parts. Corrosion protection of all ferrous materials.
4. Directions Apply a thin even film. Use extension tube for more precise application. Shake well before use. Stir or mix bulk products well before use. For application in dipping baths, take care to stir periodically, limit the evaporation and clean and replace the product when stable emulsions are formed. Use only with adequate ventilation. Do not use on energized equipment. Test before use on sensitive materials. To remove residues or excess product, use one of the CRC cleaners. A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC product
3. Applications Coin mechanisms. Fine mechanics. Cleaning mechanical parts. Pneumatic tools. Handling equipment. Precision instruments. Agricultural equipment. Surface treatment. Seized and corroded parts. Corrosion protection of all ferrous materials.
4. Directions Apply a thin even film. Use extension tube for more precise application. Shake well before use. Stir or mix bulk products well before use. For application in dipping baths, take care to stir periodically, limit the evaporation and clean and replace the product when stable emulsions are formed. Use only with adequate ventilation. Do not use on energized equipment. Test before use on sensitive materials. To remove residues or excess product, use one of the CRC cleaners. A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC product
Yes! I am Interested
Watch Video
Explore more products
LOCTITE 518 TTL 5
Get Best QuoteCRC Rost Flash Pro
Get Best QuoteCrc Galva Brite Zinc Spray
Get Best QuoteCRC CRICK 130
Get Best QuoteHIKOKI CC14STD-CUT OFF TOOL 3800RPM 2200W
Get Best QuoteCrc Plastik 70 Conformal Coating Spray
Get Best Quote
X