Ross Enterprises

 CRC 2-26 is a multipurpose lubricant and anti-corrosion protecting product

Cleans, lubricates, protects, penetrates, and loosens corrosion.
• Prevents corrosion by displacing moisture.
• Restores electrical values by reducing current leakage.
• Provides precision lubrication by its thin, high dielectric strength, lubricating film.
• Helps restore water-damaged electrical equipment
 • Frees rusted or seized parts by penetrating into the finest pores and cracks.
• Can be used on all metals and alloys.
• Will not harm most of modern plastics, painted surfaces, coatings and rubbers.
• Convenient 360° (upside-down) spray valve for aerosols.
• Non-flammable CO2 propellant, giving an active product content of 95%.
• Does not contain silicon or halogenated hydrocarbons.
• Complies with the ROHS directive: does not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), bis(2- ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP).
• Specifications : * NSN 6850-00-874-5847.

Additional Information:

• Delivery Time: IMMEDIATE

1: General description A true multi-purpose toolkit in a can for professional automotive engineers. Displaces moisture, starts wet engines, prevents electrical failures. Lubricates, loosens seized and rusted mechanisms. Protects against humidity and prevents flash rust.

2: Features • General Corrosion protection. • Temporary conservation of metal parts during storage. • Protects metals and alloys. • Displaces and seals out water and moisture. • Loosens metal parts seized by dirt, corrosion or dried-up grease. • Penetrates quickly. • Safe on all metal surfaces, does not stain. • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. • Convenient 360° (including inverted position) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95% (aerosol).

3: Applications • Seized and corroded parts. • To remove moisture from ignition systems. • Professional multipurpose automotive product.

4: Directions • Apply a thin even film. • Use extension tube for more precise application. • Allow a few minutes for good penetration. 

CRC Heavy Duty Degreaser is a chlorinated solvent-based degreaser designed to quickly dissolve and remove heavy grease, oil, and grime from industrial and mechanical equipment. Key features include fast evaporation, a lack of residue, a high dielectric strength (around 39,200 volts), and a lack of a flash or fire point. It's suitable for cleaning air tools, brakes, clutches, motors, and generators, but caution is advised on plastics. Product features Effective: Aggressively removes grease, oil, and sludge.Fast evaporation: Minimizes equipment downtime.Leaves no residue: Eliminates the need for wiping in many applications.High dielectric strength: Rated at 39,200 volts, making it safer for use around electrical equipment compared to some other cleaners.No flash or fire point: Reduces fire risk from incidental contact with live electrical equipment.Non-corrosive and non-staining: Safe for most metal surfaces and industrial equipment.Environmentally compliant: Complies with EPA regulations and does not contain Class I or II ozone-depleting chemicals, serving as an alternative to 1,1,1-trichloroethane. Applications Air toolsMechanical brakes and clutchesChainsWire ropesMotors, generators, and compressorsParts, bearings, dies, and molds Directions for use Apply liberally to the surface.Allow the excess to run off.Wipe with an absorbent cloth or allow to air dry.Repeat the application if necessary.Use the extension tube for hard-to-reach areas. Important precautions Plastics: Use with caution on plastics; test in an inconspicuous area first.Electrical: Do not use on or near live electrical sources. Allow equipment to cool down and de-energize before cleaning to prevent shock or fire.Storage: Do not store in direct sunlight or near heat sources. Do not puncture, incinerate, or store above \(120^{\circ }F\) (\(49^{\circ }C\)).

WD-40 Specialist Contact Cleaner, featuring patented Smart Straw technology, blasts away oil, dirt, flux reside and condensation from sensitive electronics and electrical equipment with pinpoint precision. It dries quickly, leaves no reside and removes more soil than leading competitors, making it the best at cleaning electrical contacts. Safe and ideal for use on printed circuit boards, controls, battery terminals, switches, precision instruments and electric panels.


Printed Circuit Boards • Controls • Switches • Tape Heads • Precision Instruments

 Cleans Sensitive Electronic Equipment • Leaves No Residue • Plastic & Metal Safe • Dielectric Strength > 25,000 Volts • 50-state VOC Compliant • Quick Drying • NSF K2 Reg# 146857

Features-• Controled evaporation for enhanced cleaning action. • High flash point for application safety. • Low odor. • Non conductive. • Non corrosive. • Does not leave a residue. • Convenient 360° (including inverted position) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95%.

Applications
• Electro-mechanical assemblies. • Electrical aggregates. • Pumps. • Cleaning mechanical parts.• Wire ropes. • Handling equipment.

Directions • Spray liberally and allow to run off. • Use extension tube for more precise application. • When applied by dipping, agitation accelerates the action. • Slight heating (up to 40°C) enhances cleaning action in dipping baths. May also be applied by wiping with a clean rag or by brushing. To clean equipment interior, covers, plates, etc. should be removed prior to product application. • Do not use on energized equipment. • Do not use on sensitive electronic equipment. • Test before use on sensitive materials. • Allow to dry completely before reactivation. • Protect and re-lubricate if necessary. • A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available. 
 

WD-40 lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves and locks. It quickly removes adhesives, corrosion and paint. It displaces moisture to restore water flooded equipment such as engines, spark plugs and power tools.Surface Compatibility For all variations : WD-40 demonstrates none to negligible deleterious effect to plastic, rubber, and metal hard surfaces. This includes Acetal, neoprene/hard rubber, HDPE, PPS Copolymer Polysulfone, Teflon, Viton, steel, galvanized steel hot dip, electroplated, copper, brass, magnesium, nickel, tin plate, titanium, and zinc. Surface Cautions Nearly all surfaces interact with WD-40 as they would any high grade ali phatic petroleum spirit. Certain types of rubber will swell upon prolonged immersion. Wax polishes and certain wax coatings may be softened by WD 40. Clear polycarbonate and polystyrene may stress craze or crack. Always test surfaces first.