Ross Enterprises

1. GENERAL DESCRIPTION CRC Inox Kleen is a water based, foaming cleaner for degreasing and cleaning shiny metal surfaces. The product combines a high cleaning power with the application of a durable protective coating, in one step. 2. FEATURES • Eliminates fingerprints, watermarks, dust and dirt from stainless steel. • Leaves a protective non greasy barrier for a long term original aspect. • CRC Inox Kleen provides metal surfaces with a long term staining and contamination resistance. • Suitable for aluminum, stainless steel, chrome and most plastics (test prior to use). • No dilution is necessary. • Non corrosive. • Non-ozon depleting. • NSF registration : A7/C1 (registration number: 138083) 3. APPLICATIONS • Cleaning of all kind of metal surfaces in the industry. • Protection of metal surfaces against staining and contaminations. A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available for all CRC products.

. FEATURES  Excellent touch-up for welding seams on stainless steel structures.  Provides a closed durable film.  Unique combination of flexibility and hardness.  Adheres extremely well to stainless steel surfaces.  Totally free of lead.  Quick drying.  The aerosol uses DME propellant for controlled spray and film properties.

. APPLICATIONS Touch up of discoloration on stainless steel, due to heat (as from welding).  Industrial vehicles  Safety equipment  Piping and couplings  Containers  Furniture  Home and garden equipment

. DIRECTIONS  Shake aerosol can very well for at least one minute after agitator ball is free. Repeat frequently while using.  Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.  Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 5 minutes.  When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with a fine wire.  Do not use on energized equipment. Use in a well ventilated area.  A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC