Ross Enterprises

M-seal GP epoxy compound on curing exhibits tough & long lasting bond and sets into a hard mass that can be drilled, filed, tapped, machined, cut and then painted. It has very good electrical insulating properties and the cured product is resistant to moisture, heat, mild acids & alkali.

TECHNICAL DATASHEET PRODUCT:

STEELGRIP PVC ELECTRICAL INSULATION TAPE (1.80 cm X 6.5m X 0.125 mm.)
DESCRIPTION:
STEELGRIP is self adhesive PVC electrical insulation tape conforming to BIS standard IS 7809 (Part 3, Sec.1). This tape is extensively used in household as well as all segments of industry viz. Electrical Appliance, Electronics, Telecom, Railways, Automobiles etc. STEELGRIP ensures complete and long lasting electrical insulation of wiring joints. It is water resistant and self-extinguishing in nature. STEELGRIP is available in five colours viz. Black, Blue, Green, Yellow & Red. STEELGRIP has a wide range of sizes to cater to different end user segments. TYPICAL PROPERTIES: Sr. No. PROPERTY TYPICAL VALUE IS 7809 (Part 3, Sec.1) OUR TYPICAL VALUE 1 Colour of the Tape As specified As specified 2 Width of the Tape As specified As specified 3 Length of the Tape As specified As specified 4 Total Thickness of the Tape, in mm 0.10 – 0.15 0.125 5 Adhesion to Steel N/10 mm width 1.6 minimum 2.5 6 Adhesion to Backing N/10 mm width 1.3 minimum 2.5 7 Tensile Strength N/10mm per width per mm thickness 150 minimum 250 8 Electrical Strength at RT. kV/mm 40 minimum 65 9 Electrical Strength after humid conditioning kV/mm 35 minimum 60 10 Flammability Shall be Self Extinguishing Self Extinguishing 11 Electrolytic Corrosion No Corrosion of Cu wire No Corrosion of Cu wire 12 Insulation Resistance ohms 1.0 X 1011 ohms minimum 1.6 X 1011 ohms 13 Stability to Accelerated Aging at 65±1°C & 80 % Relative Humidity for 96 Hrs. N/10 mm width No deterioration or change in properties of the backing 1.3 N minimum No deterioration or change in properties of the backing 2.0 N minimum

We are engaged in offering quality products to our clients. Our range of all products is widely appreciated by our clients

We are engaged in offering quality products to our clients. Our range of all products is widely appreciated by our clients

We are engaged in offering quality products to our clients. Our range of all products is widely appreciated by our clients

We are engaged in offering quality products to our clients. Our range of all products is widely appreciated by our clients

We are engaged in offering quality products to our clients. Our range of all products is widely appreciated by our clients

• Prevents Loosening: It Fills All Gaps Between The Cylindrical Components And Cures Into A Hard Thermoset Plastic. This Unitizes The Assembly And Prevents Loosening And Leakage From Shock And Vibration.
• Augments Press Fit.
• Recommended For Parts That Will Need Subsequent Dismantling, Eg Retention Of Bearings On Shaft And Into Housing.
• Prevents Loosening And Leakage From Shock And Vibration.

Loctite 641 Is Designed For The Bonding Of Cylindrical Fitting Parts, Particularly Where Disassembly Is Required For Servicing Operations. Ideal For Parts That Need Subsequent Dismantling, I.e. Retention Of Bearings On Shafts And In Housings.read Less
Medium Strength Bearing Retainer (1700 Psi) Fills Gaps Upto 0.15 Mm 150 c Service Temperature